Follow the these steps to download and install PPXplorer on your Pocket PC.
Click on the appropriate link under the Downloadable files section to begin downloading.
Your browser will ask you if you want to open the file or save it.
Click the Save button to save PPXplorer setup program to your hard disk.
Browse to a location that you want to save the installation program and click Ok.
The downloading starts. Click Close after download is complete.
After download is completed, exit any running programs.
Exit any running program on you Pocket PC. (Go Start->Settings->System->Memory->Running Programs and tap Stop All)
Ensure the Pocket PC handheld device is in the cradle before beginning the installation process.
Double-click on the PPXSetup.exe file that you downloaded in steps 1 to 5.
Follow the instructions provided by the setup wizard to complete the installation of PPXplorer.
Click on the appropriate link under the Downloadable files section to begin downloading.
Your browser will ask you if you want to open the file or save it.
Click the Save button to save the PPXplorer setup program to your hard disk.
Browse to a location that you want to save the installation program and click Ok.
The downloading starts. Click Close after download is complete.
After download is completed, copy the downloaded file (PPXSetup.cab) to the Compact Flash Card (using a USB cards reader/writer) and make it Read-Only. To make the file Read-Only right click on it and select Properties. Then check the check box Read-Only in the Properties dialog box.
Insert the Compact Flash Card in your Pocket PC, and tap on the file PPXSetup.cab in the compact Flash Card to run the setup on your Pocket PC.
You can use the same card to install PPXplorer on other Pocket PCs.
On Windows Mobile 2003 Second Edition devices you may get a message warning that the program you installed may not display properly because it was designed for a previous version of Windows Mobile software. Tap Ok to ignore the message and continue.
You will not need a new unlock code, when upgrading from previous versions of PPXplorer. When upgrading from desktop computer, the installer program asks you if you want to uninstall the previous version before installing the new version. Select "Yes" to continue. Also in Pocket PC you will be asked if you want to re-install PPXplorer. Tap Yes to install the new version.
Download PPXplorer setup program (PPXSetup.exe) for installation from a PC. | |
Download PPXplorer setup program (PPXSetup.cab) for installation from a Compact Flash card. |
Windows 98, Windows Me, Windows NT 4.0, Windows 2000 , or Windows XP with Microsoft ActiveSync 3 or later.
Pocket PC 2002 or 2003 with Intel ARM or XScale processor.
At least 3 Mbytes of free space on the Pocket PC.
To completely uninstall PPXplorer from your pocket PC go to Today screen and select Start->Settings->System->Remove Programs. Then select Shahab PPXplorer from the list and tap on the Remove button.
You can reinstall PPXplorer to your Pocket PC:
Make sure the Pocket PC handheld device is in the cradle.
On your Desktop PC go to Start->Settings->Control Panel and select Add/Remove Programs icon.
Select PPXplorer in the list and click on the Change button.
In the Welcome Page of setup, select Repair and continue following the instructions.
Copyright © 2004 Shahab Hamidi-Rad. All rights reserved. | Last update: 03/30/2005 |